Ableconn PEX-SA115 2-Port SATA 6G PCI Express Host Adapter Card – AHCI 6Gbps SATA III PCIe 2.0 Controller Card (Marvell 88SE9128 Chipset) – Support Hardware RAID 0, 1


Price: $39.99 - $31.99


Add two SATA 6G ports with up to 6 Gbps data rate to your computer.

Specification
* Connector:
– 2 x SATA (7 pin; DATA) Plug
– PCI Express x1 Male
* Chipset: MARVELL 88SE9128

* Software:
– No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems
– Drivers are available for Windows XP

* Data transfer rate:
– Up to 6 Gbps
* Number of Ports That Support Port Multiplier: 2 (can only use 1 PM at a time)
* Number of Drives Supported Through Port Multiplier: 1 to 5

* 6Gbps SATA III Internal 2 Ports PCIe Gen2 x1 lane host adapter
* Hardware RAID controller to offload host CPU for max performance
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 5Gbps PCI Express 2.0
* Fully compliant with Serial ATA specifications 3.0 transfer rate of 6Gbps
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Supports Non-Raid, Hardware RAID 0, 1 for HDD & SSD
* Supports Non-Raid mode for Optical Drive and Blu-Ray Drive
* Supports ATA and ATAPI commands
* Supports SATA Hot-plug, and Native Command Queuing (NCQ)
* Supports one (1) Port Multiplier with FIS-based or Command-based switching 
* LED Pin headers for LED activity indicators for each port
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
* BIOS on board supports Windows booting
* Fully RoHS compliant.
* Made in Taiwan

Package Contents
* Ableconn 2-Port SATA 6G AHCI PCI Express Host Adapter Card
* One (1) low profile PCIe bracket
* Quick Installation Guide

Warranty
* Limited One-Year Warranty and Lifetime Product Support

Supports SATA III transfer speeds up to 6.0Gbps; backward compatible with SATA I/II at 1.5/3.0Gbps
Built with Marvell 88SE9128. Supports Hardware RAID 0 and 1 modes
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.